Boedeker Plastics, Inc. Logo -- boedeker plastics supply shiner
     texas tx usa boedeker plastics material supply shiner texas usa plastics
     distributor plastics sales plastics supply plastics machine shop

Hydel ® PC-7 ESD
Static Dissipative Polycarbonate Datasheet

904 West 6th Street, Shiner, Texas 77984 USA
Phone: 1-361-594-2941     Fax: 1-361-594-2349     E-Mail: info@boedeker.com

1-800-444-3485

BPI Home Page | Applications | Materials Guide | Contact Us!

blue line

DESCRIPTION
Hydel ® PC-7 is a polycarbonate base material that has been filled with graphite "nanotube" microfibers to provide static dissipative properties. Unlike conventional carbon products, this technology allows for superior dimensional stability after machining, consistent electrical properties, excellent surface quality, and minimal sloughing. This material has superior workability and more consistent filler dispersement than competitive equivalent products.

Hydel ® PC-7 is black in color and is available in sheet, rod, tubular bar and profile forms.

blue line


PROPERTIES of HYDEL ® PC-7 POLYCARBONATE

ASTM or UL test Property Hydel ® PC-7
PHYSICAL
D792 Density (lb/in³)
(g/cm³)
0.044
1.22
D570 Water Absorption, 24 hrs (%) 0.15
MECHANICAL
D638 Tensile Strength @ Break (psi) 9,000
D638 Tensile Modulus (psi) 333,000
D638 Tensile Elongation @ Break (%) 8
D790 Flexural Strength (psi) 10,800
D790 Flexural Modulus (psi) 340,000
D790 Compressive Strength (psi) 12,300
D256 IZOD Impact Notched (ft-lb/in) 1.2
D785 Hardness, Rockwell 120 R
THERMAL
D696 Coefficient of Linear Thermal Expansion
(x 10-5 in./in./°F)
3.7
C177 Thermal Conductivity
(BTU-in/ft²-hr-°F)
(x 10-4 cal/cm-sec-°C)

-
-
D648 Heat Deflection Temp (°F / °C)
at 264 psi

280 / 138
- Max Operating Temp (°F / °C) 260 / 127
UL94 Flammability Rating HB
ELECTRICAL
D149 Dielectric Strength (V/mil) short time, 1/8" thick -
D150 Dielectric Constant at 1 KHz -
D257 Surface Resistivity (ohms/sq) 107 - 109
D257 Volume Resistivity (ohm-cm) at 50% RH 107 - 109

NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers' complete material property datasheets.
All values at 73°F (23°C) unless otherwise noted.
HYDEL is a registered trademark of A.L. Hyde Company
blue line

Boedeker Plastics, Inc.
904 West 6th Street, Shiner, Texas 77984 USA
USA TOLLFREE : 1-800-444-3485
Phone: 1-361-594-2941     Fax: 1-361-594-2349     E-Mail: info@boedeker.com

©     Copyright Boedeker Plastics, Inc.