GENERAL PROPERTIESSemitron® ESd 410C is a static dissipative PolyEtherImide (Ultem ®). This material has the same general properties as unfilled Ultem, but with static dissipative properties throughout -- resistivity in the range of 104 to 106. It may be used to temperatures of 410°F (210°C) without degradation. Semitron® ESd 410C offers low stress for tighter tolerances during machining.
This material is available in sheet and rod forms and is BLACK in color.
SEMITRON® ESd DESCRIPTIONSemitron® ESd is a family of static dissipative products designed for use where electrical discharge in operation is a problem. They are commonly used for sensitive electronic components including integrated circuits, hard disk drives, and circuit boards. Semitron® products are also an excellent choice for material handling applications, and components in high speed electronic printing and reproducing equipment.
Semitron® ESd products are inherently dissipative. They do not rely on atmospheric phenomena (humidity) to activate, nor are surface treatments used to achieve dissipation. Static electicity is dissipated through these products as readily as it is dissipated along the surface.
TYPICAL PROPERTIES of SEMITRON® ESd 410C
|ASTM or UL test||Property||Semitron® ESd 410C|
|D570||Water Absorption, 24 hrs (%)||0.3|
|D638||Tensile Strength (psi)||9,000|
|D638||Tensile Modulus (psi)||850,000|
|D638||Tensile Elongation at Yield (%)||2|
|D790||Flexural Strength (psi)||12,000|
|D790||Flexural Modulus (psi)||850,000|
|D695||Compressive Strength (psi)||19,500|
|D695||Compressive Modulus (psi)||600,000|
|D785||Hardness, Rockwell||M115 / R125|
|D256||IZOD Notched Impact (ft-lb/in)||0.8|
|D696||Coefficient of Linear Thermal Expansion
(x 10-5 in./in./°F)
|D648||Heat Deflection Temp (°F / °C)
at 264 psi
410 / 210
|D3418||Melting Temp (°F / °C)||n/a|
|-||Max Operating Temp (°F / °C)||338 / 170|
(x 10-4 cal/cm-sec-°C)
|D149||Dielectric Strength (V/mil) short time, 1/8" thick||-|
|D150||Dielectric Constant at 1 MHz||-|
|D150||Dissipation Factor at 1 MHz||-|
|EOS/ESD S11.11||Surface Resistivity (ohms/square)||104 - 106|
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers' complete material property datasheets.SEMITRON is a registered trademark of Quadrant Engineering Plastic Products.
All values at 73°F (23°C) unless otherwise noted.