Boedeker Plastics, Inc. Logo -- boedeker plastics supply shiner
     texas tx usa boedeker plastics material supply shiner texas usa plastics
     distributor plastics sales plastics supply plastics machine shop

Tecaform ® SD
Static Dissipative Acetal Datasheet

904 West 6th Street, Shiner, Texas 77984 USA
Phone: 1-361-594-2941     Fax: 1-361-594-2349     E-Mail: info@boedeker.com

1-800-444-3485

BPI Home Page | Applications | Materials Guide | Contact Us!

blue line

DESCRIPTION
click to resize photo Tecaform ® SD (formerly known as Hydel ® ASD) is an acetal base material that has been filled with an inherently dissipative polymer (IDP) additive. IDP's have no carbon or graphite content and do not slough conductive particles. This material has consistent electrical properties, good wear resistance, broad chemical resistance, and machines very easily.

Tecaform ® SD is  NATURAL (tan or ivory)   in color and is available in sheet, rod, tubular bar and profile forms.

( see also Standard Acetal )

blue line


PROPERTIES of TECAFORM ® SD Acetal

ASTM or UL test Property Tecaform ® SD
PHYSICAL
D792 Density (lb/in³)
(g/cm³)
0.048
1.33
D570 Water Absorption, 24 hrs (%) 2.0
MECHANICAL
D638 Tensile Strength @ Break (psi) 6,400
D638 Tensile Modulus (psi) 220,000
D638 Tensile Elongation @ Break (%) 15
D790 Flexural Strength (psi) -
D790 Flexural Modulus (psi) 215,000
D790 Compressive Strength (psi) -
D256 IZOD Impact Notched (ft-lb/in) 1.2
D785 Hardness, Rockwell 110 R
THERMAL
D696 Coefficient of Linear Thermal Expansion
(x 10-5 in./in./°F)
9
C177 Thermal Conductivity
(BTU-in/ft²-hr-°F)
(x 10-4 cal/cm-sec-°C)

-
-
D648 Heat Deflection Temp (°F / °C)
at 264 psi

215 / 102
- Max Operating Temp (°F / °C) 180 / 82
UL94 Flammability Rating -
ELECTRICAL
D149 Dielectric Strength (V/mil) short time, 1/8" thick -
D150 Dielectric Constant at 1 KHz -
D257 Surface Resistivity (ohms/sq) 1010 - 1011
D257 Volume Resistivity (ohm-cm) at 50% RH 1010 - 1011

NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers' complete material property datasheets.
All values at 73°F (23°C) unless otherwise noted.
TECAFORM is a registered trademark of Ensinger-Hyde

blue line

http://www.boedeker.com/tecaform-sd.htm

Boedeker Plastics, Inc.
904 West 6th Street, Shiner, Texas 77984 USA
USA TOLLFREE : 1-800-444-3485
Phone: 1-361-594-2941     Fax: 1-361-594-2349     E-Mail: info@boedeker.com

©     Copyright Boedeker Plastics, Inc.