Boedeker Plastics, Inc. Logo -- boedeker plastics supply shiner
     texas tx usa boedeker plastics material supply shiner texas usa plastics
     distributor plastics sales plastics supply plastics machine shop

PES CN Conductive
Polyethersulfone Specifications

904 West 6th Street, Shiner, Texas 77984 USA
Phone: 1-361-594-2941     Fax: 1-361-594-2349     E-Mail: info@boedeker.com

1-800-444-3485

BPI Home Page | Applications | Materials Guide | Contact Us!

blue line

GENERAL PROPERTIES
PES CN-F is a static dissipative PolyEtherSulfone. This material has the same general properties as unfilled Polyethersulfone, but filled with carbon fibers to add static dissipative properties throughout -- a resistivity in the range of 104 to 106. It may be used to temperatures of 320°F (160°C) without degradation.

PES CN-F is available in BLACK color only.
( see also Standard PolyEtherSulfone Specifications )

Static Dissipative / Anti-Static (SD) :
Resistivity generally between 107 and 1012 ohms per square.
Initial electrostatic charges are suppressed.

Conductive (CN) :
Resistivity generally between 103 and 106 ohms per square.
No initial charge, provides path for charge to bleed off.

blue line


TYPICAL PROPERTIES of PES CN CONDUCTIVE POLYETHERSULFONE

ASTM or UL test Property PES CN-F
PHYSICAL
D792 Density (lb/in³)
(g/cm³)
0.048
1.34
D570 Water Absorption, 24 hrs (%) 0.21
MECHANICAL
D638 Tensile Strength (psi) 29,000
D638 Tensile Modulus (psi) -
D638 Tensile Elongation at Yield (%) 2
D790 Flexural Strength (psi) 42,000
D790 Flexural Modulus (psi) 1,800,000
D695 Compressive Strength (psi) -
D695 Compressive Modulus (psi) -
D785 Hardness, Rockwell M -
D256 IZOD Notched Impact (ft-lb/in) 1.3
THERMAL
D696 Coefficient of Linear Thermal Expansion
(x 10-5 in./in./°F)
2.2
D648 Heat Deflection Temp (°F / °C)
at 66 psi
at 264 psi

415
212
D3418 Melting Temperature (°F / °C) -
- Max Operating Temp (°F / °C) 410
210
C177 Thermal Conductivity
(BTU-in/ft²-hr-°F)
(x 10-4 cal/cm-sec-°C)

-
-
UL94 Flammability Rating V-0
ELECTRICAL
D257 Surface Resistivity (ohms/sq) 104-106
D257 Volume Resistivity (ohm-cm), Dry 104-106
NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers' complete material property datasheets.
All values at 73°F (23°C) unless otherwise noted.
blue line

Boedeker Plastics, Inc.
904 West 6th Street, Shiner, Texas 77984 USA
USA TOLLFREE : 1-800-444-3485
Phone: 1-361-594-2941     Fax: 1-361-594-2349     E-Mail: info@boedeker.com

©     Copyright Boedeker Plastics, Inc.