||Ultra high impact, high performance, fire-rated sheet suitable for a
broad range of demanding applications.
|Anti-static sheet in full color range for electronic/electrical applications.
Retains anti-static properties after forming.
||White #62000 or black #52114 substrate with colored, weatherable cap for
thermoforming letter backs of electrical signage. Eliminates painting.
|For National Sanitation Foundation applications. Numerous textures/sizes,
limited colors. FDA approved raw materials. Cost competitive with ABS sheet.
||Super tough, durable METALLIC-colored, a proprietary alloy sheet, sets new standards
for thermoformers in: formability, rigidity, breakage resistance, fire retardancy
||Rigid, sag-resistant ceiling panel grade in .080" (2.03mm) thickness,
available pre-cut. Class 10 rated for clean rooms. Also for food plants,
computer rooms, operating rooms, etc.
||High performance sheet with integral granite pattern in five colors. Rated
Class I/A for non-wallcovering applications. UL 94 V-0 and 5V fire rating.
||High performance sheet for building product applications. Rated Class I/A
in gauges to .060" (1.52mm); Class II/B in gauges to 0.093" (2.36mm). UL listed.
|KYDEX 152 AR
||Super tough, durable sheet sets new standards for thermoformers
and membrane pressers in formability, rigidity, breakage resistance,
and abrasion resistance.
|KYDEX 152 WG
||Super tough, durable sheet is available in five aesthetically pleasing woodgrain patterns.
This material brings new dimensions to thermoformers and membrane pressers in extensibility,
toughness, and fire retardancy in a woodgrain design.
||High performance sheet for building product and clean room applications.
Rated Class I/A and Class 10 in gauges to .125" (3.12mm). UL listed.
||A thermoplastic sheet that is used for laminating and
thermoforming applications. Meets the Australian fire retardant
properties of AS 1530.3 and 1530.4.
||A proprietary, high performance thermoplastic sheet that
meets the M1 requirement for the French Epiradiateur Test NFP 92-501.
||Mid-temperature aircraft grade with improved heat distortion characteristics
for higher in-service temperatures 168-178°F (75-81°C).
Meets FAR requirement 25.853(a).
||General purpose sheet with good impact resistance, excellent extensibility
and solvent resistance. Cost competitive with many other thermoplastics.
||A proprietary Bi-layer thermoplastic sheet that is cost
competitive with fire retardant ABS (FR-ABS) formulations but with superior
properties ... it is less hygroscopic than FR-ABS ... eliminates drying.
||KYDEX sheet of any color with a clear, weatherable cap. Caps also available
with black/white or rust/gray granite patterns.
||Weatherable, monolithic (no cap) sheet in limited light colors. Excellent
||High-temperature aircraft grade with improved heat distortion characteristics
for higher in-service temperatures 180-195°F (82-90.5°C).
Meets FAR requirement 25.853(a).
||High performance grade for mass transit vehicle interiors. Meets FTA and
FRA fire requirements. Meets low smoke generation requirements.
||High performance grade for aircraft interiors. Meets FAR fire
requirements 25.853 (a) and (d).Meets low smoke and low RHR generation requirements.
||Damage-resistant laminating material. Ratings of Class I/A and UL 94 V-0
in gauges to .040 (1.02mm). Can also be thermoformed and membrane pressed.
||High impact, high performance, fire-rated sheet. Cost competitive with
flame retardant ABS, but with great impact and extensibility.
||Recycled grade of Kydex "utility black" #52065 sheet. Excellent
||Recycled black #52114 sheet. Rated UL 94 V-0. Excellent performance-to-cost
||Recycled beige #72401, gray #52346, or black #52114 Kydex sheet with
cap in select colors. Rated UL 94 V-0 and 5V.
||A recycled grade of a proprietary thermoplastic
sheet that is cost competitive with other grades of thermoplastic
sheet while offering improved performance.